Dual Interface PC/SC Ccid RFID IC Smart Card Reader
RCR-2933DualBoost is the second generation of rCloud’s RCR-2900DualBoost Reader.
Description
2933is a powerful and efficient dual interface smart card reader, which can be used toaccess ISO7816 MCU cards and Mifare, ISO 14443 Type A and B Contactless Cards. Itmakes useof the USB CCID class driver and USB interface to connect to a PC and accept card commands fromthe computer application.
The reader, specificallyto communicate with a contactless tag, MCU card, SAM card, or the device peripherals (LED or buzzer), will carry out a command issued from the PC. It has three interfaces namely the PICC, IC Cand SAM interfaces, and all these interfaces follow the PC/SC specifications. The contact interface makes use of the APDU commands as defined in ISO 7816 specifications.
Specification:
| Items | Technical Parameter |
|---|---|
| Protocol | USB CCID |
| Connector Type | Standard Type A USB |
| Supply Voltage | From USB port |
| Speed | USB Full Speed (12 Mbps) |
| Standard | ISO 7816 Parts 1-3, Class A, B, C (5 V, 3 V, 1.8 V) |
| Protocol | T=0; T=1; Memory Card Support |
| Supply Current | Max. 50 mA. |
| Smart Card Read/Write Speed | 9.6 Kbps – 480 Kbps |
| Short Circuit Protection | (+5) V/GND on all pins |
| Clock Frequency | 4 MHz |
| Card Insertion Cycles | Min. 100,000 |
| PC-linked Mode | PC/SC |
| Online download | Support ISP online download. |
| Net Weight | Approx.: 0.3 Kg (without accessories) |
| ROHS standard | Comply with ROHS standard. |
| Temperature | 0 °C – 60 °C |
| Humidity | Max. 90% (non-condensing) |
Features :
• USB Full Speed Interface
• Plug and Play – CCID support brings utmost mobility
• Smart Card Reader:
o SupportsISO7816ClassA,BandC(5V,3V,1.8V)cards o Supports CAC (Common Access Card)
o Supports J-LIS Card
o Supports microprocessor cards with T=0 or T=1 protocol
o Supports memory cards
o Supports PPS (Protocol and Parameters Selection) o Features Short Circuit Protection
• Application Programming Interface:
o Supports PC/SC
o Supports CT-API (through wrapper on top of PC/SC)
• Supports AndroidTM 3.1 and later 1
• Compliant with the following standards:
o EN 60950/IEC 60950
o ISO 7816
o EMVTM Level 1 (Contact) o PC/SC
o CCID
Notes:
2)Keep card reader clean without any oil dirt.
3)IC card insertion direction: the chip of IC card upward, and insert card from the front.
